The MB308 is a very low profile bass enclosure measuring under 9" high (22.5cm). It is designed for applications where height is limited but meaningful bass is desired, for example, under seating in restaurants and bars. The MB308 makes a great complement to our F55, F81 and F88 enclosures. It consists of 3 x customised 8" loudspeakers which drive a ported resonant chamber enclosure handling a total of 300 Watts and averaging 101dB sensitivity between 60Hz and 140Hz.

The Microbass 210 is an extension of the new Funktion-One infrabass technology which augments their new F88 compact full range enclosure. The Microbass is small enough to fit under seating in restaurants and bars, consists of 2 x Funktion-One 16 ohm 10" loudspeakers which drive a ported resonant chamber enclosure handling 400watts and averaging 102dB between 50Hz and 125Hz. The efficient 8ohm enclosure allows multiple devices to be driven by one amplifier.

The MB112 is Funktion-One’s most compact bass enclosure. It makes a great bass extension to the F55 loudspeaker in applications including bars, restaurants and home studios. It consists of a single customised 12" loudspeaker driving a ported resonant chamber enclosure handling 250Watts and averaging 101dB sensitivity between 75Hz and 180Hz.

The Minibass 212 is an extension of the new Funktion-One infrabass technology which augments their new F88 compact full range enclosure as well as being capable of providing low bass extension to other products. The Minibass is small enough to fit under seating in restaurants and bars, consists of 2 x Funktion-One 16 ohm 12" loudspeakers which drive a ported resonant chamber enclosure handling 600watts and averaging 103dB between 40Hz and 125Hz. The efficient 8ohm enclosure allows multiple devices to be driven by one amplifier

The F215 is a double 15" bass enclosure which utilises the same bass loading technology as Funktion One's highly regarded F218. This product has similar performance characteristics to the F218. It is pitched higher giving slightly less low end extension but even tighter and punchier upper bass. It uses the same Funktion One designed 15" loudspeaker driver that is used in the Resolution 2 enclosure. The F215 can be used to great effect in systems with Infrabass (or Infrabass/Infrahorn) enclosures providing extreme low end extension.

SINGLE 18" BASS ENCLOSURE

The single 18 version of the F218 for those who require a smaller enclosure. In common with the F218, the Mark 2 release brings refined loading, improved heat dissipation and an updated driver specification. Outdoor installation version available with appropriate suspension hardware. It provides large quantities of tight, punchy, well-defined, clean bass from a small and manageable package. The F118 can be supplied with a an optional pole mount for use with products including the Resolution 2SH.

This is Funktion One’s renowned bass design, which is the result of an holistic approach, over many years of research and development, into bass loading techniques. The evolved product is highly regarded in professional audio circles for its extreme robustness and delivery of large quantities of tight, punchy, well-defined clean bass from a relatively small and very manageable package. It has often been emulated but never equalled. The recently introduced F218 Mark 2 brings refined loading, improved heat dissipation and an updated driver spec. In larger systems, F218s are best deployed stacked above each other on their sides. When used in multiples in this way the horn mouth is effectively enlarged resulting in improved deep bass delivery.

NEW 21" BASS ENCLOSURE

The F121 single 21" bass enclosure is a highly attractive proposition for applications desiring access to Funktion One’s incredible 21" bass technology but in a smaller form than its double 21" counterpart. The enclosure and Funktion One driver have been beautifully tuned and matched to deliver a highly accurate (and even addictive) bass experience which not only gives the listener the anticipated depth and physicality of bass but combines this with unprecedented upper bass speed and precision. The F121 can be used singly or in multiples with Resolution systems or Dance Stacks.

- Self-powered or Unpowered (with amp-ready woodwork)

- Neodynium, dual voice-coil Funktion-One driver

- Very high efficiency (105dB - 1W at 1m)

- Exceptional Andrews' tuning and loading

- Touring or Fixed Installation

- 18mm Birch Ply Enclosure

- Finish in Funktion-One deep voilet

DOUBLE 21" BASS ENCLOSURE

F221 is an extremely convincing bass enclosure combining real depth, upper bass speed and high efficiency.

- Self-powered or Unpowered (with amp-ready woodwork)

- Two Neodynium, dual voice-coil Funktion-One drivers

- Very high efficiency (106dB - 1W at 1m)

- Exceptional Andrews' tuning and loading

- Touring or Fixed Installation

- 18mm Birch Ply Enclosure

- Finish in Funktion-One deep voilet

The patent pending Infrabass 218 is a completely new Andrews' bass design aimed at the octave from 30 - 60Hz. It delivers copious quantities of wonderfully smooth, deep bass for a powerful sonic experience. Forming the low-end foundation for the Dance Stack, the Infrabass can also give tremendous authority to Resolution 2s adding yet a further dimension to their application. With attention to timing, the Infrabass can be combined with F218s to give the extension and depth of a much larger system. Due to the very large current requirements of extreme low frequencies, only amplifiers with high calibre power supplies will realise the full potential of this product.

The Double InfraHorn is a horn extension which can be used in conjunction with a pair of Infrabass 218’s for applications with extreme bass requirements. The additional loading provided by the horn significantly enhances both the efficiency and directivity of the already superb Infrabass. When bolted directly to the front of a pair of Infrabass the horn increases the output of the pair by up to a staggering 12dB at 33Hz, thus giving a further depth and firmness to a system’s low end. Double Infrahorns can be used singly or stacked above each other in multiples to produce unprecedented low-bass performance. Where space permits, the Double Infrahorn represents a very cost effective way of maximising Infrabass output, whether it be for use within the club environment or for outdoor/live arenas.

The new Funktion One Resolution 18 flying bass enclosure has been designed for use in flown Resolution 4-5 touring arrays.

The bass delivery from Resolution 18s is abundant, effortless, deep and precise.

Resolution 18s are dimensionally identical to the Resolution 4 and Resolution 5 enclosures, facilitating co-ordinated system use.

Where ground stacked bass is required we would advocate the use of the renowned F-218 double 18" bass enclosures. The Resolution 18 is an evolution of this design.

The revolutionary flying system, (patent pending), makes the system extremely fast and easy to fly . With Resolution, there is no need for separate flying trunks or losable parts such as chains, links, pins or tools, as all inter-cabinet flying hardware is completely built into the enclosure.

The system truck packs superbly requiring less transport expense.

The enclosure weight is minimised with Neodymium magnet on the 18" driver.

A highly effective wheel-board completes the packaging offering full touring protection for the front of the Resolution 18 and also makes transport a dream.

Should a discrete appearance be required we provide an optional fine cloth scrim grill that has been selected for its maximum acoustic transparency